Daiwa 25 Saltiga (G) 14000-XH
Below is a freight estimate based off shipping this item to your post code. Actual shipping costs are calculated at the checkout & are based off Land & Sea shipping information.
Please enter your postcode for delivery estimate
*See our shipping page for full information our shipping policies both domestic & international
Product Description
Extreme speed. Unmatched reach. Built for the chase.
The Daiwa 25 Saltiga 14000-XH is designed for anglers who demand relentless speed and power from their spinning reel. With an extra-high gear ratio of 6.2:1, this reel retrieves an incredible 133 cm per turn, perfect for fast-paced surface action and long-range control. It delivers the legendary Saltiga strength and refinement in a body built to handle the toughest pelagics on the planet. When chasing kingfish, tuna, or GTs, the Saltiga 14000-XH gives you the confidence to react instantly and the control to dominate the fight.
Why the Daiwa 25 Saltiga 14000-XH?
- High-Speed Gear System: The 6.2:1 ratio and large spool diameter give lightning-fast line pickup, ideal for topwater casting and fast lure presentations.
- Powerdrive & Monocoque Strength: Engineered for maximum torque transfer with minimal flex, even under extreme drag pressures.
- 25 kg ATD Tough Drag: Delivers consistent, smooth drag performance when fish are at full run.
- Magsealed Protection: Keeps salt, sand and grit out of the main shaft and bearings, prolonging life and maintaining smooth operation.
- Precision Balance: Designed for effortless casting and lure recovery, giving superior control during high-speed retrieves.
- Refined Power: Perfect blend of speed and strength, built for topwater, jigging, and fast-moving offshore predators.
For anglers who thrive on speed, precision and power, the Saltiga 14000-XH is your ultimate saltwater partner. Built to accelerate through chaos, it’s ready for the biggest fish that move the fastest.
Cast fast. Hook hard. Win faster.
Engineered Power and Performance.
The 25 SALTIGA is all muscle, designed to help you "BREAK YOUR RECORD" and capture trophy fish, cast after cast. With a gear over 10% larger than its predecessor, the 25 SALTIGA delivers unmatched strength and precision you can feel with every turn.
NO FAILURES. NO COMPROMISES.
When the pressure is on, 25 SALTIGA delivers. The one-piece MONOCOQUE BODY and MAGSEALED technology ensure superior water resistance, keeping out salt and impurities for consistent, reliable performance in all conditions.
CONTROL IN EVERY TURN.
The 25 SALTIGA is all muscle, designed to help you "BREAK YOUR RECORD" and capture trophy fish, cast after cast. With a gear over 10% larger than its predecessor, the 25 SALTIGA delivers unmatched strength and precision you can feel with every turn.
FISH HARDER. FISH LONGER.
When the pressure is on, 25 SALTIGA delivers. The one-piece MONOCOQUE BODY and MAGSEALED technology ensure superior water resistance, keeping out salt and impurities for consistent, reliable performance in all conditions.
Experience raw strength redefined with the POWERDRIVE ENGINE body unit. Featuring an OVERSIZED POWER DIGIGEAR and POWER ROLLER OSCILLATION system, it delivers unmatched winding power, smoothness and durability.
SIZE THAT COMMANDS PERFORMANCE
Built with G1 duralumin for exceptional durability, the MONOCOQUE BODY design accommodates a larger, thicker gear—10% larger and 6% thicker than the previous model. Precisely engineered gear teeth enhance drive efficiency, while minimal deflection ensures stable, consistent meshing. This reduces power loss, providing smooth and effortless winding performance.
SMOOTH UNDER PRESSURE
The redesigned two-ball bearing pillar support system enhances oscillation efficiency by 20%, ensuring smooth, responsive, and powerful winding, even under heavy loads. Frictional resistance is significantly reduced, providing reliable performance and ultimate control when tackling the strain of the largest fish in the ocean.
The redesigned TOUGH LINE ROLLER SYSTEM is enlarged to endure repeated heavy loads, and the updated design better integrates the screw with the bail arm. Removing joints at high-stress points enhances rigidity and durability around the line roller. The new line roller, optimised for PE braided lines, reduces sliding resistance by approximately 3%.
POWER MEETS PRECISION
The new POWERDRIVE ROTOR is engineered for strength and efficiency. Crafted to handle the heaviest loads, this rotor delivers superior stability, allowing anglers to pull in the largest of fish with ease. The unique shape, which appears as though it was cut from a sphere, maintains low inertia and has an increased rigidity of 7%. The POWERDRIVE ROTOR ensures that each turn of the handle translates into a smoother, more powerful retrieve, even under extreme pressure.
ALWAYS IN CONTROL
The new crank-shaped design directs the line smoothly to the line roller without fail. The redesigned shape and spring mechanism enhance opening and closing angles, preventing unintentional bail movement. This improvement significantly enhances line feeding to the roller, especially during jigging and while the line is tensioned.
This is used for Models 18000 and above. Drags that use carbon washers are highly durable, but DRD takes it to another level with a new drag mechanism designed to target larger fish. With eight metal rollers on a single metal plate, DRD controls the loss of drag force caused by frictional heat. It is smooth under pressure and is 5x times more durable.
This is used for Models 14000 and below. The ATD TOUGH DRAG delivers exceptional drag strength and smoothness. The large carbon drag stack provides anglers with the ultimate in smooth performance and reliability.
RIGID ONE-PIECE BODY.
DAIWA’s “LC-ABS SW” technology enhances power and rigidity. The spool’s upper section is optimised with a two-step taper toward the spool ring, minimising friction for smoother line release. Its narrow width prevents tangling, even during the final stages of casting with less line remaining. This design ensures smooth casting with thick lines and improves casting distance by approximately 2%, providing anglers with an improved casting experience.
The redesigned TOUGH LINE ROLLER SYSTEM is enlarged to endure repeated heavy loads, and the updated design better integrates the screw with the bail arm. Removing joints at high-stress points enhances rigidity and durability around the line roller. The new line roller, optimised for PE braided lines, reduces sliding resistance by approximately 3%.
POWER MEETS PRECISION The new POWERDRIVE ROTOR is engineered for strength and efficiency. Crafted to handle the heaviest loads, this rotor delivers superior stability, allowing anglers to pull in the largest of fish with ease. The unique shape, which appears as though it was cut from a sphere, maintains low inertia and has an increased rigidity of 7%. The POWERDRIVE ROTOR ensures that each turn of the handle translates into a smoother, more powerful retrieve, even under extreme pressure.
ALWAYS IN CONTROL
The new crank-shaped design directs the line smoothly to the line roller without fail. The redesigned shape and spring mechanism enhance opening and closing angles, preventing unintentional bail movement. This improvement significantly enhances line feeding to the roller, especially during jigging and while the line is tensioned.
| Model | Type | Ball Bearing | Max Drag | Gear (IPT) | PE Capacity | Weight | Knob |
|---|---|---|---|---|---|---|---|
| SALTIGA 8000-P (G) | Spin | 14/1 | 25 kg | 4.8:1 (94 cm) | PE 4–300 | 670 g | Aluminium Round |
| SALTIGA 8000-H (G) | Spin | 14/1 | 25 kg | 5.6:1 (110 cm) | PE 4–300 | 680 g | Soft Egg |
| SALTIGA 10000-P (G) | Spin | 14/1 | 25 kg | 4.8:1 (99 cm) | PE 5–300 | 675 g | Aluminium Round |
| SALTIGA 10000-H (G) | Spin | 14/1 | 25 kg | 5.6:1 (117 cm) | PE 5–300 | 685 g | Soft Egg |
| SALTIGA 14000-P (G) | Spin | 14/1 | 25 kg | 4.8:1 (102 cm) | PE 6–300 | 690 g | Soft Egg |
| SALTIGA 14000-XH (G) | Spin | 14/1 | 25 kg | 6.2:1 (133 cm) | PE 6–300 | 690 g | Soft Egg |
| SALTIGA 18000-H (G) | Spin | 14/1 | 30 kg | 5.5:1 (129 cm) | PE 8–300 | 920 g | Soft Egg |
| SALTIGA 20000-P (G) | Spin | 14/1 | 30 kg | 4.4:1 (111 cm) | PE 10–300 | 930 g | Soft Egg |
| SALTIGA 20000-H (G) | Spin | 14/1 | 30 kg | 5.5:1 (138 cm) | PE 10–300 | 930 g | Soft Egg |
| SALTIGA 25000-P (G) | Spin | 14/1 | 30 kg | 4.4:1 (121 cm) | PE 12–300 | 945 g | Soft Egg |
- Daiwa 25 Saltiga 14000-XH (G) high-speed offshore spinning reel
- Protective reel pouch
- Warranty card and documentation pack
- After saltwater use, lightly rinse with fresh water and dry. Avoid pressure-washing the rotor/bail area.
- Back off drag after trips to preserve the carbon stack.
- Periodically grease line roller and handle knob bearings; service as required to maintain Magsealed performance.
What type of fishing suits the 14000-XH best?
Ideal for fast-moving topwater and bluewater species like GTs, kingfish, and tuna. The extra-high-gear system is perfect for lure work that needs immediate line recovery and aggressive action.
How is the 14000-XH different from the 14000-P?
The 14000-XH features a much faster 6.2:1 gear ratio compared to the 14000-P’s 4.8:1. This gives significantly quicker retrieve speed for topwater applications, while the P model provides more torque for deep-water jigging or heavy drag work.
What braid and leader setup do you recommend?
PE 6–8 braid is ideal, matched with a 60–100 lb fluorocarbon leader for large pelagics. The reel’s deep spool easily accommodates 300 m+ of heavy braid.
Is the reel suited to sustained offshore use?
Yes. The Magsealed system and Monocoque body ensure long-term corrosion resistance and maintain smooth operation in harsh saltwater environments. Simple rinsing and light oiling after trips is sufficient maintenance.
Where can I buy the Daiwa 25 Saltiga 14000-XH (G)?
Available exclusively from Land & Sea online and in-store: www.land-sea.co.nz.
More from Daiwa
Ratings Snapshot
Product Rating
Review this product
Adding a review will require a valid email for verification