Daiwa 25 Saltiga (G) 18000-H
Below is a freight estimate based off shipping this item to your post code. Actual shipping costs are calculated at the checkout & are based off Land & Sea shipping information.
Please enter your postcode for delivery estimate
*See our shipping page for full information our shipping policies both domestic & international
Product Description
Power on tap. Speed on demand. Built for giants.
The Daiwa 25 Saltiga 18000-H is the definition of offshore dominance, delivering the ideal balance of massive drag strength, high-speed retrieval, and rugged saltwater endurance. Designed for anglers targeting the most powerful pelagic species, it combines a 5.5:1 gear ratio with up to 30 kg of drag, giving you the torque to muscle through heavy runs while maintaining fast line recovery. Whether you’re chasing giant trevally, yellowfin or dogtooth tuna, the Saltiga 18000-H is made to take punishment and keep performing day after day on the bluewater frontier.
Why the Daiwa 25 Saltiga 18000-H?
- Unstoppable Power: Delivers up to 30 kg of ATD Tough Drag pressure with a massive gear train that stays stable under full load.
- High-Speed Retrieval: 5.5:1 gear ratio brings in around 129 cm per crank, ideal for chasing fish that run long and deep.
- Heavy-Line Capacity: Deep spool holds PE 8 / 300 m for true offshore endurance.
- Monocoque Body: The single-piece frame eliminates flex, improving power transfer and internal alignment under extreme pressure.
- Magsealed Protection: Prevents saltwater intrusion, extending reel life and keeping the retrieve buttery-smooth.
- Purpose-Built Strength: Designed for the toughest battles, when your drag is locked and your target is measured in meters, not pounds.
When speed, capacity, and raw torque need to work as one, the Saltiga 18000-H is the offshore reel you bring to the fight. It’s engineered for total control, cast after cast, run after run.
Load up. Hold on. Conquer deep water.
Engineered Power and Performance.
The 25 SALTIGA is all muscle, designed to help you "BREAK YOUR RECORD" and capture trophy fish, cast after cast. With a gear over 10% larger than its predecessor, the 25 SALTIGA delivers unmatched strength and precision you can feel with every turn.
NO FAILURES. NO COMPROMISES.
When the pressure is on, 25 SALTIGA delivers. The one-piece MONOCOQUE BODY and MAGSEALED technology ensure superior water resistance, keeping out salt and impurities for consistent, reliable performance in all conditions.
CONTROL IN EVERY TURN.
The 25 SALTIGA is all muscle, designed to help you "BREAK YOUR RECORD" and capture trophy fish, cast after cast. With a gear over 10% larger than its predecessor, the 25 SALTIGA delivers unmatched strength and precision you can feel with every turn.
FISH HARDER. FISH LONGER.
When the pressure is on, 25 SALTIGA delivers. The one-piece MONOCOQUE BODY and MAGSEALED technology ensure superior water resistance, keeping out salt and impurities for consistent, reliable performance in all conditions.
Experience raw strength redefined with the POWERDRIVE ENGINE body unit. Featuring an OVERSIZED POWER DIGIGEAR and POWER ROLLER OSCILLATION system, it delivers unmatched winding power, smoothness and durability.
SIZE THAT COMMANDS PERFORMANCE
Built with G1 duralumin for exceptional durability, the MONOCOQUE BODY design accommodates a larger, thicker gear—10% larger and 6% thicker than the previous model. Precisely engineered gear teeth enhance drive efficiency, while minimal deflection ensures stable, consistent meshing. This reduces power loss, providing smooth and effortless winding performance.
SMOOTH UNDER PRESSURE
The redesigned two-ball bearing pillar support system enhances oscillation efficiency by 20%, ensuring smooth, responsive, and powerful winding, even under heavy loads. Frictional resistance is significantly reduced, providing reliable performance and ultimate control when tackling the strain of the largest fish in the ocean.
The redesigned TOUGH LINE ROLLER SYSTEM is enlarged to endure repeated heavy loads, and the updated design better integrates the screw with the bail arm. Removing joints at high-stress points enhances rigidity and durability around the line roller. The new line roller, optimised for PE braided lines, reduces sliding resistance by approximately 3%.
POWER MEETS PRECISION
The new POWERDRIVE ROTOR is engineered for strength and efficiency. Crafted to handle the heaviest loads, this rotor delivers superior stability, allowing anglers to pull in the largest of fish with ease. The unique shape, which appears as though it was cut from a sphere, maintains low inertia and has an increased rigidity of 7%. The POWERDRIVE ROTOR ensures that each turn of the handle translates into a smoother, more powerful retrieve, even under extreme pressure.
ALWAYS IN CONTROL
The new crank-shaped design directs the line smoothly to the line roller without fail. The redesigned shape and spring mechanism enhance opening and closing angles, preventing unintentional bail movement. This improvement significantly enhances line feeding to the roller, especially during jigging and while the line is tensioned.
This is used for Models 18000 and above. Drags that use carbon washers are highly durable, but DRD takes it to another level with a new drag mechanism designed to target larger fish. With eight metal rollers on a single metal plate, DRD controls the loss of drag force caused by frictional heat. It is smooth under pressure and is 5x times more durable.
This is used for Models 14000 and below. The ATD TOUGH DRAG delivers exceptional drag strength and smoothness. The large carbon drag stack provides anglers with the ultimate in smooth performance and reliability.
RIGID ONE-PIECE BODY.
DAIWA’s “LC-ABS SW” technology enhances power and rigidity. The spool’s upper section is optimised with a two-step taper toward the spool ring, minimising friction for smoother line release. Its narrow width prevents tangling, even during the final stages of casting with less line remaining. This design ensures smooth casting with thick lines and improves casting distance by approximately 2%, providing anglers with an improved casting experience.
The redesigned TOUGH LINE ROLLER SYSTEM is enlarged to endure repeated heavy loads, and the updated design better integrates the screw with the bail arm. Removing joints at high-stress points enhances rigidity and durability around the line roller. The new line roller, optimised for PE braided lines, reduces sliding resistance by approximately 3%.
POWER MEETS PRECISION The new POWERDRIVE ROTOR is engineered for strength and efficiency. Crafted to handle the heaviest loads, this rotor delivers superior stability, allowing anglers to pull in the largest of fish with ease. The unique shape, which appears as though it was cut from a sphere, maintains low inertia and has an increased rigidity of 7%. The POWERDRIVE ROTOR ensures that each turn of the handle translates into a smoother, more powerful retrieve, even under extreme pressure.
ALWAYS IN CONTROL
The new crank-shaped design directs the line smoothly to the line roller without fail. The redesigned shape and spring mechanism enhance opening and closing angles, preventing unintentional bail movement. This improvement significantly enhances line feeding to the roller, especially during jigging and while the line is tensioned.
| Model | Type | Ball Bearing | Max Drag | Gear (IPT) | PE Capacity | Weight | Knob |
|---|---|---|---|---|---|---|---|
| SALTIGA 8000-P (G) | Spin | 14/1 | 25 kg | 4.8:1 (94 cm) | PE 4–300 | 670 g | Aluminium Round |
| SALTIGA 8000-H (G) | Spin | 14/1 | 25 kg | 5.6:1 (110 cm) | PE 4–300 | 680 g | Soft Egg |
| SALTIGA 10000-P (G) | Spin | 14/1 | 25 kg | 4.8:1 (99 cm) | PE 5–300 | 675 g | Aluminium Round |
| SALTIGA 10000-H (G) | Spin | 14/1 | 25 kg | 5.6:1 (117 cm) | PE 5–300 | 685 g | Soft Egg |
| SALTIGA 14000-P (G) | Spin | 14/1 | 25 kg | 4.8:1 (102 cm) | PE 6–300 | 690 g | Soft Egg |
| SALTIGA 14000-XH (G) | Spin | 14/1 | 25 kg | 6.2:1 (133 cm) | PE 6–300 | 690 g | Soft Egg |
| SALTIGA 18000-H (G) | Spin | 14/1 | 30 kg | 5.5:1 (129 cm) | PE 8–300 | 920 g | Soft Egg |
| SALTIGA 20000-P (G) | Spin | 14/1 | 30 kg | 4.4:1 (111 cm) | PE 10–300 | 930 g | Soft Egg |
| SALTIGA 20000-H (G) | Spin | 14/1 | 30 kg | 5.5:1 (138 cm) | PE 10–300 | 930 g | Soft Egg |
| SALTIGA 25000-P (G) | Spin | 14/1 | 30 kg | 4.4:1 (121 cm) | PE 12–300 | 945 g | Soft Egg |
- Daiwa 25 Saltiga 18000-H (G) high-capacity offshore spinning reel
- Protective reel pouch
- Warranty and user documentation
- After saltwater use, lightly rinse with fresh water and dry. Avoid pressure-washing the rotor/bail area.
- Back off drag after trips to preserve the carbon stack.
- Periodically grease line roller and handle knob bearings; service as required to maintain Magsealed performance.
What type of fishing is the 18000-H made for?
Perfect for heavy popper casting, vertical jigging, and targeting the largest pelagics, including giant trevally, dogtooth, kingfish, and tuna in deep-water environments.
How does the 18000-H differ from the 14000-XH or 20000-P?
The 18000-H offers a balanced combination of speed and power, sitting between the lightning-fast 14000-XH and the ultra-torque 20000-P. It's ideal for anglers needing both fast line pickup and high drag pressure without over-gearing the retrieve.
What line and leader setup do you recommend?
Best spooled with PE 8 braid (300 m) and a 100-130 lb fluorocarbon leader for topwater and deep-water use. Pair with a 7'0"-8'0" heavy spin rod rated 250-450 g for best performance.
Can it handle large tuna or GTs?
Absolutely. With 30 kg of smooth drag and heavy-duty gearing, the Saltiga 18000-H is purpose-built for those species, giving you stopping power and speed to match their explosive runs.
Where can I buy the Daiwa 25 Saltiga 18000-H (G)?
Available through Land & Sea online and in-store: www.land-sea.co.nz.
More from Daiwa
Ratings Snapshot
Product Rating
Review this product
Adding a review will require a valid email for verification