Daiwa 25 Saltiga (G) 20000-P
Below is a freight estimate based off shipping this item to your post code. Actual shipping costs are calculated at the checkout & are based off Land & Sea shipping information.
Please enter your postcode for delivery estimate
*See our shipping page for full information our shipping policies both domestic & international
Product Description
Torque without compromise. Built for the heaviest battles offshore.
The Daiwa 25 Saltiga 20000-P is a reel built for serious bluewater warfare. Featuring a massive spool, ultra-strong gearing, and a slower Power-gear ratio for maximum torque, it’s made to dominate the ocean’s toughest predators. From dogtooth and yellowfin to marlin and giant trevally, the Saltiga 20000-P delivers unstoppable winding power and confidence when every turn of the handle counts. Combined with the Monocoque body, Magsealed protection, and a 30 kg ATD Tough Drag, this reel is the ultimate weapon for hard-charging fish and unforgiving saltwater conditions.
Why the Daiwa 25 Saltiga 20000-P?
- Power-Gear Ratio (4.4:1): Designed for maximum torque and control under full load, perfect for deep cranking or heavy vertical jigging.
- 30 kg ATD Tough Drag: Tremendous stopping force with ultra-smooth pressure delivery, keeping fish under control during long runs.
- Monocoque (MQ) Body: One-piece aluminum body increases rigidity and eliminates frame flex during hard cranking.
- Huge Line Capacity: Deep spool holds PE 10 / 300 m, ideal for heavy offshore setups and long, brutal fights.
- Magsealed Technology: Protects critical components from saltwater intrusion for long-term reliability and silky-smooth performance.
- Precision Powerdrive Design: Oversized gears with refined tolerances deliver consistent torque and strength where it matters most.
When chasing ocean giants, there’s no room for compromise. The Saltiga 20000-P brings unrelenting strength, capacity, and endurance to every offshore battle, the ultimate partner for anglers who play in the heavy league.
Crank slow. Pull hard. Land monsters.
Engineered Power and Performance.
The 25 SALTIGA is all muscle, designed to help you "BREAK YOUR RECORD" and capture trophy fish, cast after cast. With a gear over 10% larger than its predecessor, the 25 SALTIGA delivers unmatched strength and precision you can feel with every turn.
NO FAILURES. NO COMPROMISES.
When the pressure is on, 25 SALTIGA delivers. The one-piece MONOCOQUE BODY and MAGSEALED technology ensure superior water resistance, keeping out salt and impurities for consistent, reliable performance in all conditions.
CONTROL IN EVERY TURN.
The 25 SALTIGA is all muscle, designed to help you "BREAK YOUR RECORD" and capture trophy fish, cast after cast. With a gear over 10% larger than its predecessor, the 25 SALTIGA delivers unmatched strength and precision you can feel with every turn.
FISH HARDER. FISH LONGER.
When the pressure is on, 25 SALTIGA delivers. The one-piece MONOCOQUE BODY and MAGSEALED technology ensure superior water resistance, keeping out salt and impurities for consistent, reliable performance in all conditions.
Experience raw strength redefined with the POWERDRIVE ENGINE body unit. Featuring an OVERSIZED POWER DIGIGEAR and POWER ROLLER OSCILLATION system, it delivers unmatched winding power, smoothness and durability.
SIZE THAT COMMANDS PERFORMANCE
Built with G1 duralumin for exceptional durability, the MONOCOQUE BODY design accommodates a larger, thicker gear—10% larger and 6% thicker than the previous model. Precisely engineered gear teeth enhance drive efficiency, while minimal deflection ensures stable, consistent meshing. This reduces power loss, providing smooth and effortless winding performance.
SMOOTH UNDER PRESSURE
The redesigned two-ball bearing pillar support system enhances oscillation efficiency by 20%, ensuring smooth, responsive, and powerful winding, even under heavy loads. Frictional resistance is significantly reduced, providing reliable performance and ultimate control when tackling the strain of the largest fish in the ocean.
The redesigned TOUGH LINE ROLLER SYSTEM is enlarged to endure repeated heavy loads, and the updated design better integrates the screw with the bail arm. Removing joints at high-stress points enhances rigidity and durability around the line roller. The new line roller, optimised for PE braided lines, reduces sliding resistance by approximately 3%.
POWER MEETS PRECISION
The new POWERDRIVE ROTOR is engineered for strength and efficiency. Crafted to handle the heaviest loads, this rotor delivers superior stability, allowing anglers to pull in the largest of fish with ease. The unique shape, which appears as though it was cut from a sphere, maintains low inertia and has an increased rigidity of 7%. The POWERDRIVE ROTOR ensures that each turn of the handle translates into a smoother, more powerful retrieve, even under extreme pressure.
ALWAYS IN CONTROL
The new crank-shaped design directs the line smoothly to the line roller without fail. The redesigned shape and spring mechanism enhance opening and closing angles, preventing unintentional bail movement. This improvement significantly enhances line feeding to the roller, especially during jigging and while the line is tensioned.
This is used for Models 18000 and above. Drags that use carbon washers are highly durable, but DRD takes it to another level with a new drag mechanism designed to target larger fish. With eight metal rollers on a single metal plate, DRD controls the loss of drag force caused by frictional heat. It is smooth under pressure and is 5x times more durable.
This is used for Models 14000 and below. The ATD TOUGH DRAG delivers exceptional drag strength and smoothness. The large carbon drag stack provides anglers with the ultimate in smooth performance and reliability.
RIGID ONE-PIECE BODY.
DAIWA’s “LC-ABS SW” technology enhances power and rigidity. The spool’s upper section is optimised with a two-step taper toward the spool ring, minimising friction for smoother line release. Its narrow width prevents tangling, even during the final stages of casting with less line remaining. This design ensures smooth casting with thick lines and improves casting distance by approximately 2%, providing anglers with an improved casting experience.
The redesigned TOUGH LINE ROLLER SYSTEM is enlarged to endure repeated heavy loads, and the updated design better integrates the screw with the bail arm. Removing joints at high-stress points enhances rigidity and durability around the line roller. The new line roller, optimised for PE braided lines, reduces sliding resistance by approximately 3%.
POWER MEETS PRECISION The new POWERDRIVE ROTOR is engineered for strength and efficiency. Crafted to handle the heaviest loads, this rotor delivers superior stability, allowing anglers to pull in the largest of fish with ease. The unique shape, which appears as though it was cut from a sphere, maintains low inertia and has an increased rigidity of 7%. The POWERDRIVE ROTOR ensures that each turn of the handle translates into a smoother, more powerful retrieve, even under extreme pressure.
ALWAYS IN CONTROL
The new crank-shaped design directs the line smoothly to the line roller without fail. The redesigned shape and spring mechanism enhance opening and closing angles, preventing unintentional bail movement. This improvement significantly enhances line feeding to the roller, especially during jigging and while the line is tensioned.
| Model | Type | Ball Bearing | Max Drag | Gear (IPT) | PE Capacity | Weight | Knob |
|---|---|---|---|---|---|---|---|
| SALTIGA 8000-P (G) | Spin | 14/1 | 25 kg | 4.8:1 (94 cm) | PE 4–300 | 670 g | Aluminium Round |
| SALTIGA 8000-H (G) | Spin | 14/1 | 25 kg | 5.6:1 (110 cm) | PE 4–300 | 680 g | Soft Egg |
| SALTIGA 10000-P (G) | Spin | 14/1 | 25 kg | 4.8:1 (99 cm) | PE 5–300 | 675 g | Aluminium Round |
| SALTIGA 10000-H (G) | Spin | 14/1 | 25 kg | 5.6:1 (117 cm) | PE 5–300 | 685 g | Soft Egg |
| SALTIGA 14000-P (G) | Spin | 14/1 | 25 kg | 4.8:1 (102 cm) | PE 6–300 | 690 g | Soft Egg |
| SALTIGA 14000-XH (G) | Spin | 14/1 | 25 kg | 6.2:1 (133 cm) | PE 6–300 | 690 g | Soft Egg |
| SALTIGA 18000-H (G) | Spin | 14/1 | 30 kg | 5.5:1 (129 cm) | PE 8–300 | 920 g | Soft Egg |
| SALTIGA 20000-P (G) | Spin | 14/1 | 30 kg | 4.4:1 (111 cm) | PE 10–300 | 930 g | Soft Egg |
| SALTIGA 20000-H (G) | Spin | 14/1 | 30 kg | 5.5:1 (138 cm) | PE 10–300 | 930 g | Soft Egg |
| SALTIGA 25000-P (G) | Spin | 14/1 | 30 kg | 4.4:1 (121 cm) | PE 12–300 | 945 g | Soft Egg |
- Daiwa 25 Saltiga 20000-P (G) heavy-duty saltwater spinning reel
- Protective reel pouch
- Warranty card & documentation
- After saltwater use, lightly rinse with fresh water and dry. Avoid pressure-washing the rotor/bail area.
- Back off drag after trips to preserve the carbon stack.
- Periodically grease line roller and handle knob bearings; service as required to maintain Magsealed performance.
What fishing applications suit the 20000-P?
Perfect for targeting giant trevally, yellowfin, bluefin, dogtooth, and marlin using large poppers, heavy stickbaits, and deep-jig presentations. The slower gear ratio gives immense cranking torque for vertical fights and deep runs.
How does the 20000-P compare with the 18000-H?
The 20000-P features a lower 4.4:1 gear ratio for more torque and heavier drag pressure, while the 18000-H is faster (5.5:1) for more versatile retrieve speed. The 20000-P is your go-to when maximum lifting power and spool capacity are critical.
What braid and leader setup do you recommend?
PE 10 braid (300 m+) matched with a 120-150 lb fluorocarbon leader gives optimal strength and shock resistance for topwater and vertical applications.
Is the 20000-P too heavy for topwater casting?
While designed for heavy jigging and deep-water fights, skilled anglers can still use it for large-bait topwater casting when extra spool volume and drag are needed. It balances best on heavy-duty 7'-8' rods rated 300-500 g.
Where can I buy the Daiwa 25 Saltiga 20000-P (G)?
Available from Land & Sea both online and in-store: www.land-sea.co.nz.
More from Daiwa
Ratings Snapshot
Product Rating
Review this product
Adding a review will require a valid email for verification